Akulon? F126-C
聚酰胺6
產品說明:
Low/Medium Viscosity, Film Extrusion, Lubricated
Special Features:
Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.
添加劑 | |
特性 | |
加工方法 | |
多點數據 | |
樹脂ID (ISO 1043) | |
密度 | 1.13 | g/cm3 | ISO 1183 |
吸水率 |
|
| ISO 62 |
飽和, 73°F | 9.5 | % |
|
平衡, 73°F, 50% RH | 2.5 | % |
|
粘數 | 164 | cm3/g | ISO 307 |
摩擦系數 |
|
| ISO 8295 |
Dynamic | 1.2 |
|
|
Static | 1.5 |
|
|
拉伸模量 2 | 66700 | psi | 內部方法 |
拉伸應力 - MD |
|
| ISO 527-3 |
屈服 | 4640 | psi |
|
斷裂 | 11600 | psi |
|
伸長率 - MD (斷裂) | 350 | % | ISO 527-3 |
Trouser Tear - Parallel | 32.0 |
| ISO 6383-1 |
水氣透過率 (73°F, 85% RH) | 2.3 | g/100 in2/24 hr | DIS 15106-1/-3 |
氧氣傳輸速率 |
|
| DIS 15105-1/-2 |
0% RH : 73°F | 26 | cm3/m2/bar/24 hr |
|
85% RH : 73°F | 38 | cm3/m2/bar/24 hr |
|
熔融溫度 3 | 428 | °F | ISO 11357-3 |
線形熱膨脹系數 |
|
| ISO 11359-2 |
流動 | 5.0E-5 | in/in/°F |
|
橫向 | 5.6E-5 | in/in/°F |
|
Specific Heat Capacity | 0.370 | Btu/lb/°F |
|
熔體粘度 (500°F) | 380000 | mPa·s | 內部方法 |
Average Specific Heat Capacity (68 到 302°F) | 0.538 | Btu/lb/°F |
|
Puncture Resistance | 21.5 | ft·lb/in | 內部方法 |
RSV - Formic Acid, 1g/100ml | 2.65 |
| 內部方法 |
干燥溫度 | 167 | °F |
|
干燥時間 | 8.0 到 10 | hr |
|
料筒1區溫度 | 428 | °F |
|
料筒2區溫度 | 464 | °F |
|
料筒3區溫度 | 482 | °F |
|
接頭溫度 | 500 | °F |
|
口模溫度 | 482 | °F |
|
如需恩驊力（Envalior）原廠物性表及相關文件，請聯系我司工作人員，謝謝！
